Publicité
Les langues disponibles
Les langues disponibles
36
Installation
Rear spacers
You can find the two spacers in the bag with doc-
umentation.
Do these steps to install the spacers:
1.
Release the screw.
2.
Engage the spacer below the screw.
3.
Turn the spacer to the right position.
4.
Tighten again the screws.
Levelling
When placing the appliance ensure that it stands
level. This can be achieved by two adjustable feet
at the bottom in front.
Door reversibility
4
To carry out the following opera-
tions, we suggest that this be made
with another person that will keep a
firm hold on the doors of the appli-
ance during the operations.
To change the opening direction of the
door, do these steps:
• Remove the plug from the power socket.
• Tilt back the appliance carefully so that
the compressor cannot touch the floor.
• Remove the plinth.
• Unscrew and remove the lower hinges.
• Remove the door.
2
1
3
Publicité
