UPPAbaby RumbleSeat Mode D'emploi page 5

RUMBLESEAT ASSEMBLY
Prior to fitting adapters to stroller frame, engage brake on stroller and remove seat from frame.
ATTACHING ADAPTERS TO VISTA FRAME
STEP 1: Unsnap basket from front of stroller frame.
STEP 3: Align notch on adapter to cross bar and slide
onto frame.
STEP 4: Re-snap basket to frame.
6
0917-RBS-USCA__Instructions_V2.indd 6-7
All manuals and user guides at all-guides.com
STEP 2: Pull tab on clasp to unfasten and rotate
attachment bracket.
STEP 4: Rotate attachment bracket over frame and
secure clasp into place by pressing down on tab.
RUMBLESEAT ASSEMBLY
REMOVING ADAPTERS FROM VISTA FRAME
STEP 1: Unsnap basket from front of stroller frame.
STEP 3: Pull adapter off of stroller frame.
STEP 2: Pull tab on clasp completely and rotate
attachment bracket.
11/15/16 1:08 PM
7