Inateck P6 Mode D'emploi page 7

Enable Standard 25
Enable China Post Code
Enable EAN-2
Enable EAN-5
Hyphen "-" displayed in
ISBN/ISSN/EAN-2/EAN-5
Enable VIN
Enable Code 32
Enable first character of Code 32
EN EN
（*）Disable Standard 25
（*）Disable China Post Code
（*）Disable EAN-2
（*）Disable EAN-5
（*）Without hyphen "-" in
ISBN/ISSN/EAN-2/EAN-5
(*) Disable VIN
(*)Disable Code 32
(*)Disable first character of Code 32
11
Product Specification
Inateck P6
Model Number
Indication Buzzer, LED
Battery Capacity 2600mAh
EEPROM 256K
Light Source Laser LED 650 ± 10nm
Applicable Barcodes Codabar, Code 11, Code 128, Code39, Code 93, EAN-8, EAN-13, ISBN, ISSN, MSI,UPC-A,
UPC-E, IATA 25, Industrial 25 / Standard 25, Interleaved 25,Matrix 25, China Postal Code，
FedEx，USPS, Code 32, VIN
Resolution 3mil
Decode Rate 220 times/s
Decode Mode Single-Line Aiming
Print Contrast 20%
Decode Angles Roll 30º，Pitch 75º，Yaw 80º
Wireless transmission band 2400.0~2483.5MHz
Wireless transmission power -4.36dBm
Packing list
• Inateck P6*1
• USB Cable*1
• Instruction Manual*1
• 2.4GHz Wireless Adapter*1
FAQs
1. Will settings be kept when Inateck P6 is power off?
Answer: All settings are made by scanning relevant barcodes, and stored in
scanner memory. They are kept even if scanner powers off. They are available to
users if scanner powers on.
2. Garbled or error appears in output result?
Answer: The default keyboard language of Inateck P6 is English. Please refer to the
instruction manual about keyboard language, and set correct one.
3. Is there any barcodes to remove Enter for suffix?
Answer: Refer to the "Frequently Used Barcodes" in instruction manual, and use "Do
Not Apply Enter for Suffix".
4. The data cannot be sent to my computer. Why?
a. When the distance between Inateck P6 and its adapter exceeds the effective
range, scanned data will not upload to comupter immediately. Instead, it will be
kept in the buffer of Inateck P6. Quickly double press on the trigger can upload
data from buffer.
12