Inateck P6 Mode D'emploi page 2

Laser Window /
Laserfenster /
読み取り窓 /
Faisceau Laser /
Finestra laser /
Ventana láser
Trigger /
Auslöser /
トリガー /
Trigger /
Pulsante scan /
Gatillo
Buzzer /
Signaltongeber /
ブザー /
Buzzer /
Segnale buzzer /
Señal de alerta
USB Port /
USB Anschluss /
USB ポート /
Port de USB /
USB Port /
Puerto USB
LED1
LED2
Shockproof Cover /
Stoßfeste Abdeckung /
耐衝撃カバー /
Couverture anti-choc /
Scocca anti urti /
Protección anti golpes
Use of Inateck P6
EN
Startup
Note:
1) Inateck P6 will start sleep mode if there is no operation on it over 3 minutes. Short
2) When the distance between Inateck P6 and its adapter exceeds the effective range,
Wireless Mode:
Power Switch /
1. Insert the 2.4G USB adapter into the USB port of computer. The initialization is
Netzschalter /
電源スイッチ /
Interrupteur d'alimentation /
Interruttore alimentazione /
2. Power on Inateck P6 by toggling switch from OFF to ON. Short press the trigger to
Interruptor de alimentación
3. Open a file on computer and move cursor to the blank where scanning output
Wired Mode:
1 2
press on the trigger can wake it up.
scanned data will be kept in the buffer of Inateck P6. Quickly double press on the
trigger can upload data from buffer.
completed if blue LED on the adapter blinks once.
emit red laser beam and scan barcodes.
should be placed. Scanning results can be displayed on computer then.