Publicité
Les langues disponibles
Les langues disponibles
Inspired by life
EVO
Lectus
MID
EVO
Lectus
LR
The aim of these instructions is to show you
how to adjust the width between the arm
supports in the EVO Lectus and the MID
Lectus to 41, 46 or 51 cm.
What you need:
04: M6x16 cylinder
14: Spacer
15: Plastic sleeve
16: Fixing block without screw thread
18: Fixing block with screw thread
Remove the cover cap from the back-rest.
In the chair in the photograph, the width
between the arm supports is 46 cm.
Remove all the cables from the ISM-8.
Remove both of the arm-rests.
EN30
All manuals and user guides at all-guides.com
Lectus
Remove the cover cap from the arm-rest
assembly.
Remove all the bolts from the arm-rest assembly.
Now you have a left side and a right side.
On both sides, screw the ball joints out of the
arm-rest assembly.
Result after removing the parts specified above.
EN31
Publicité
