GEONAUTE ON channel 500 Mode D'emploi page 6

3 GETTING STARTED
3.1 Using the batteries
The batteries come ready installed when the product is purchased. Remove the protective strip located
on the back of the device to free up the battery contacts.
3.1.1 Inserting the batteries
If the belt clip is installed,
remove it (see p. 5)
3.1.2 Charging the batteries
When charging the device, use the rechargeable batteries supplied with the original pack. If the
batteries have to be changed, use 1.2V, 800 mAh NiMH AA (LR06) type batteries.
Do not attempt to recharge non-rechargeable batteries.
Make sure that the battery compartment is correctly in place before charging the batteries.
Battery charge level
High battery
charge level
4
All manuals and user guides at all-guides.com
Observe the correct battery direction when
inserting them. Incorrect polarity can damage the
batteries and the device.
Low battery charge
Medium battery
level
charge level
Battery charged
bip bip
down