Fender BRONCO 40 Manuel De Mise En Œuvre page 7

The LEDs are numbered 1, 2, 3 and correspond to three posi-
tions within each of the 4 selection ranges on each knob.
Use the LEDs to determine exactly which position the knob
is pointing to, for example, A1, A2 or A3 (A1 is shown below).
♫
Please see the Advanced Owner's Manual for a table
of all the effects on your Bronco 40 amplifier at:
fender.com/support
Advanced Advanced
Customizing Presets
Your Bronco 40 amplifier gives you the powerful ability to
save every setting on the amplifier as part of a preset. When
you select a preset, the level of each knob, every effect
and compression setting, and the amp model selection, are
instantly recalled to your pre-programmed settings!
TYPE:
PR1165
PART NUMBERS:
2302000000 (120V, 60Hz)
2302003900 (240V, 50Hz) AUS DS
2302006900 (230V, 50Hz) EUR DS
POWER REQUIREMENTS:
110W
INPUT IMPEDANCE: GUITAR: >1MΩ
OUTPUT IMPEDANCE: LINE OUT: 3.3kΩ
POWER OUTPUT:
40W RMS into 8Ω @ 5%THD
SPEAKER:
8Ω, 10"
FOOTSWITCH (OPTIONAL):
P/N: 099-4049-000 (Lets you switch between two Quick Access presets)
DIMENSIONS HEIGHT: 15.25 in (38.7 cm)
WEIGHT:
30 lb (13.7 kg)
B R O NC O ™
on the amp. This indicates that you have temporarily modified
the current preset. You can undo your modifications by
turning the PRESET knob to a different preset and then back
again.
Software and Accessories
So far we have covered the basics of your Bronco 40 amplifier,
just enough to get you started. Please see the Advanced
Owner's Manual at:
full potential of your amplifier. There are optional accessories,
such as a footswitch that allows you to switch between two
presets. Plus, there are custom software applications available
for your PC or Mac.
www. For example, the Fender® FUSE™ application expands the
potential of your amp enormously. Fender FUSE is a preset
editor that provides easy on-computer-screen parameter
control, and the ability to customize your Bronco 40 with
deeper editing than what can be done with the amp alone.
And that's not all! There is also Ableton® Live Lite 8 Fender®
edition, which turns your Bronco 40 and computer into a
multi-track recording studio. Then there's Fender Amplitube™
software for exploring the wide world of Fender amplifier
tone through your computer.
♫
Specifications
2302000900 (120V, 60Hz) DS
2302004900 (230V, 50Hz) UK DS
2302007900 (100V, 50/60Hz) JPN DS
AUX: >13kΩ
WIDTH: 18 in (45.7 cm)
Product specifications are subject to change without notice.
f e n d e r . c o m f e n d e r . c o m
4 0
The SAVE button will light up
any programmable knob or edit any other setting
www.fender.com/support
Software for your Bronco 40 amplifier is available, free
of charge, at: www.fender.com/support
2302001900 (110V, 60Hz) TW DS
2302005900 (220V, 50Hz) ARG DS
2302009900 (220V, 60Hz) ROK DS
DEPTH: 11.25 in (28.6 cm)
red when you turn
to unlock the
7