WIKA CPP1000-M Mode D'emploi page 5

Hand Spindle Pump
CPP1000-M/-L
2. Trouble-free operation and reliability of the device can only be guaranteed so long
as the conditions stated under „Setting up the device" are taken into consideration.
3. The hand spindle pump CPP1000-M/-L always has to be handled with the care
required for a precision instrument (protect from humidity, impacts and extreme
temperatures). The pump must be handled with care (don't throw, hit, etc.) and
protect them from contamination. By no means apply any force to the operating
elements (star handle, shut-off valve, test connections) of the hand spindle pump
CPP1000-M/-L.
4. If the device is moved from a cold to a warm environment, you should therefore
ensure the device temperature has adjusted to the ambient temperature before trying
to put it into operation.
5. If the equipment is damaged and might no longer operate safely, then it should be
taken out of use and securely marked in such a way that it is not used again.
Operator safety may be at risk if:
There is visible damage to the device.
■
The device is not working as specified.
■
The device has been stored under unsuitable conditions for an extended period of
■
time.
If there is any doubt, please return the device to the manufacturer for repair or mainte-
nance.
6. Customers must not attempt to alter or repair the device themselves. If the instru-
ment is opened or attachment parts or the threaded connections are released, its
trouble-free operation and reliability is impaired and endangers the operator. Please
return the device to the manufacturer for any repair or maintenance.
7. Use original seals only in the device.
8. Any operation not included in the following instructions or outside the specifications
must not be attempted.
WIKA Operating Instructions Hand Spindle Pump
GB
5