Inateck FE3001 Manuel D'instructions page 2

English
Product introduction
This unit breathes new life into your unused hard drive. It adopts USB3.0
(Super Speed with UASP) with data transfer rates up to 5Gbps and
SATA3 (6Gbps) and is backward compatible with earlier versions as
well. This excellent transmission performance and good compatibility
is convenient for data exchange and perfectly suitable for those who
need to batch processing and clone data, such as film and television
production, Backup & processing IT data, Schools, batch processing data
etc.
Scheme image of the enclosure
Power switcher
Power adapter port
USB 3.0 port
Data transfer LED indicator
Power LED indicator
Hard drive installation steps
1. Take out the screws and slide the hard drive tray out of the enclosure.
2. Using the included screw driver, connect your SATA SSD/HDD to the
SATA connector and attach it to the drive tray by driving 2 of the
installation screws through the stabilizing holes on the bottom of the
drive tray into the bottom mounting holes on your HDD/SSD.
3. Slide the hard drive tray back inside the enclosure and drive 2 of the
enclosure installation screws into the side hard drive tray mounting
holes on the enclosure.
4. Complete installation by connecting your hard drive enclosure to your
computer using the USB port and power it up.
Product specifications
Product name USB3.0 3.5" HDD External Enclosure
Product type Inateck FE3001
Weight 280g
Color black
Supported drives interface SATAIII/II/I
Maximum height of drives Height of up to 9.5mm HDD/SSD supported
Hot plug，plug&play supported
Power Supply 12V/2.0A
Licenses CE，FCC
Measurements 190x112x32mm
Supported OS Windows XP/7/8/10；Mac9.0 or above
screw hole