Télécharger Imprimer la page

IN HOUSE LED XY10BLIR2700 Manuel D'utilisation page 12

Projecteur slim avec détecteur

Publicité

Les langues disponibles

Les langues disponibles

All manuals and user guides at all-guides.com
Electrical appliances are not toys! Use and store the appliance out of the reach of children. Children
do not appreciate the risk
that can be involved in the use of electrical appliances. Never leave the power cable hanging down so
that it cannot be pulled.
Repairs may only be carried out by authorised workshops. Appliances that have not been repaired
professionally represent a risk to the user.
Only connect the appliance to a correctly installed earthed socket with a supply voltage in accordance
with the type plate.
Do not leave the mobile appliance unattended during operation as this could lead to accidents
• Only operate mobile appliances with stands on stable surfaces.
• Never look directly into the light during operation. This could lead to eye injuries.
• Never use the appliance with a damaged cable. Take it to a specialist to be exchanged.
• Only use components and add-ons that are recommended by the manufacturer and designed for that
purpose.
• Never store the appliance without supervision in the reach of children.
• Before plugging the appliance in always ensure that both the plug and your hands are dry.
• Remove the plug before it is cleaned or polished.
• Never pull or carry the appliance by the power cable and never lay the power cable over harp edges.
• Do not use abrasive cleansers or pads for cleaning.
• Never submerge the appliance in water.
6. INITIAL OPERATION/FAULTS AND RESOLUTION
• After unpacking check that the appliance is complete and for any transport damage.
If in doubt do not use the appliance but rather contact your retailer.
• The appliance is supplied in stable packaging for protection.
- Remove the appliance from the packaging carefully.
- Remove all the packaging from the appliance.
- Clean the appliance and all accessory parts of packaging residue.
• Unwind the power cable completely.
• Mount the appliance at a suitable location on the pre-attached mounting bracket.
• Or mount the appliance on a carrying bracket or stand that is recommended by the manufacturer and
suitable for this
purpose. Please ensure that the carrying bracket or stand is standing on a stable, secure surface.
• Adjust the appliance to the direction that is to be lit.
• Make sure that the power cable length is suffi cient in order to supply power to the appliance.
• Insert the power plug into a suitable, earthed socket and do not look directly into the lamp.
Distribué par / Distribuito da / Distributed by / Vertrieben von NETELEC SRL FR - rue Philemon Laugier - 83400 Hyeres les Palmiers

Publicité

loading