LaserLiner CompactPlane-Laser 3G Mode D'emploi page 19

3
Horizontal and vertical levelling
Release the transport restraint, push the slide switch (3) to the left.
The laser cross will appear. The laser lines can be switched individually
with the selection button.
LASER
The transport restraint must be released for horizontal and vertical
levelling. The laser lines flash and the LED lights red as soon as the
!
device is outside the automatic levelling range of 3°. Position the device
such that it is within the levelling range. The LED switches back to
green and the laser lines stop flashing (steady light).
4
Slope mode
Do not release transport restraint, push slide switch (3) to the right.
Select the laser with the selector button (7). Sloping planes and tilts can
now be measured. In this mode, the laser lines no longer align automatically.
The LED (6) lights constantly red.
LASER
LASER LASER
LASER LASER
CompactPlane-Laser 3G
LASER
LASER LASER
19
EN