Cisco Systems LINKSYS ADSL2 Guide D'installation Rapide page 7

c
Enter the Default Gateway
address.
d
Enter the DNS in the Primary and/
or Secondary fields. You need to
enter at least one DNS address.
e
Click the Save Settings button to
save the settings.
3 RFC 2516 PPPoE or RFC 2364
PPPoA
If your ISP says that you are
connecting through PPPoE or PPPoA,
or if you normally enter a user name
and password to access the
Internet, perform these steps:
a
Select RFC2516 PPPoE or RFC
2364 PPPoA as appropriate for the
Encapsulation.
b
If you selected PPPoE, enter the
Service Name (if required).
c
Enter the User Name (if required).
d
Enter the Password.
e
Select Keep Alive if you always
want to be connected to your ISP ,
or select Connect on Demand if
you are charged for the time that
you are connected to your ISP .
f
Click the Save Settings button to
save the settings.
PPPoE
PPPoA
NOTE:
PPPoE users, who require a
second PPPoE by their ISP, can
select Enable for Second PPPoE
and enter the appropriate
information for the second account.
7