Cisco Systems LINKSYS ADSL2 Guide D'installation Rapide page 6

c
Click the Save Settings button to
save the settings.
Static IP Address
If your ISP says that you are
connecting through a static or fixed
IP address, perform these steps:
a
Select RFC 1483 Bridged for the
Encapsulation.
b
Select Use the following IP
Address as the IP Setting.
c
Enter the IP Address and the
Subnet Mask.
d
Enter the Default Gateway
address.
e
Enter the DNS in the Primary and/
or Secondary fields. You need to
enter at least one DNS address.
f
Click the Save Settings button to
save the settings.
2 RFC 1483 Routed
If your ISP says that you are
connecting through RFC 1483
Routed using a static IP address,
perform these steps:
a
Select RFC 1483 Routed for the
Encapsulation.
b
Enter the IP Address and the
Subnet Mask.
6
Static IP Address
RFC 1483 Routed