Publicité
Les langues disponibles
Les langues disponibles
Prepare the Hood
1 ] If present, remove all protective polyfilm from the hood and/or parts.
2 ] Remove 2 screws from top of hood. Remove the 3¼'' x 10'' adapter and the 3¼'' x 14''
3 ] Using the finger cup, remove the grease filters from the hood by pushing down
4 ] Remove and set aside the damper flap (A). Remove the blower cover plate (in grey). Using
10
adapter frame from the back of hood. Keep the screws for further use.
filters out
.
a 11/32" nutdriver or socket, remove the lock nut retaining the flange of the cover plate to the
inner back of hood (see inset). Remove the cover plate 7 retaining screws using a Phillips
screwdriver, then set the blower cover along with its screws and nut aside.
SCREWS
B
C
A
SCREWS
5
6
7
BACK OF HOOD
LOCK NUT
and tilting
4
3
2
1
Publicité
