Publicité
Les langues disponibles
Les langues disponibles
EXPLODED VIEW
Part
Part Name
1
Flame Generator Drive Motor
2
Emberbed Circuit Board
3
Blue Flame Circuit Board
4
Flame Circuit Board
5
Flame Generator/ Spinner
6
Main Circuit Board
7
Heater/Blower Assembly
8
Control Panel Circuit Board
9
Control Panel Buttons
10
Emberbed with Log
11
Log Circuit Board
12
Remote Control
13
Th ermostat Sensor
CARE AND MAINTENANCE
• Th e motors used on the fan and the fl ame generator assembly are pre-lubricated for extended bearing life and require no
further lubrication. However, we recommend periodic cleaning/vacuuming of the fan/heater.
• Clean the trim using a soft cloth, slightly dampened with citrus oil based product and buff with a clean soft cloth.
DO NOT use brass polish or household cleaners as these products will damage the metal trim. Citrus oil based products
can be obtained at supermarkets or hardware stores.
• Make sure the unit is turned OFF and unplugged before cleaning the heater or fi replace.
23RM20201REV.0
23
MP#YC
Publicité
