Télécharger Imprimer la page

Sharp PN-LC862 Manuel D'installation page 9

Masquer les pouces Voir aussi pour PN-LC862:

Publicité

Les langues disponibles

Les langues disponibles

TIPS
• Be sure to clamp the power cord (supplied) by using the supplied cable clamp. When clamping the power cord, take care not
to stress the terminal of the power cord. Do not bend the power cord excessively.
• To use the touch panel with an HDMI / D-sub / DisplayPort connection, connect the supplied USB cable to the computer.
The touch panel and touch pen operate with the standard driver of each operating system. On the Mac, operation is only
possible in mouse mode.
• The Information Display Downloader can also be downloaded from the following website.
https://www.sharp.eu/download-centre
When the Information Display Downloader is installed, you can check and download the most recent versions of the software
programs.
To install the software, see the manual for each.
Pen Software setup program and Touch Viewing Software setup program can be downloaded using Information Display
Downloader.
• Apple and Mac are trademarks of Apple Inc., registered in the U.S. and other countries.
• The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI Trade dress and the HDMI Logos are trademarks or
registered trademarks of HDMI Licensing Administrator, Inc.
• DisplayPort is a registered trademark of Video Electronics Standards Association.
• Adobe, Acrobat, and Acrobat Reader are either registered trademarks or trademarks of Adobe in the United States and/or
other countries.
• VESA is either registered trademark or trademark of Video Electronics Standards Association in the United States and/or
other countries.
• All other brand and product names are trademarks or registered trademarks of their respective holders.
Power cord (Supplied)
Cable clamp (Supplied)
7
E

Publicité

loading

Ce manuel est également adapté pour:

Pn-lc752Pn-lc652