Inserting The Battery; Battery Low Display - Korg PANDORA stomp Manuel D'utilisation

Inserting the Battery

1 Open the battery cover thatʹs located on the bottom of the
tuner.
2 Attach the battery to the battery clip, making sure that
the polarity is correct.
3 Install the battery and close the cover.
Either zinc‐carbon (6F22) or alkaline (6LR61) battery can
be used.

Battery Low display

When the battery begins to run low, the Low Battery icon
will light‐up. When this icon lights‐up, you should replace the
battery as soon as possible. Programs and other data (except
for the data being edited) will not be lost even if the battery is removed and
changed.
Battery that have run down must be removed from the PANDORA stomp. If
you leave a depleted battery in the unit, malfunctions (battery leakage, etc.) may
occur. You should also remove the battery when you do not expect to use the
PANDORA stomp for an extended period of time.
You can also use USB bus power or AC adapter (sold separately).
8