Samsung DV45H6300 Serie Manuel D'utilisation page 24

2. Cycle options
Anti Static
Rack Dry
Mixed Load Bell
Wrinkle Prevent
My Cycle
Adjust Time
Small Load Care™
(Gas model Only)
Eco Dry
(Electric model
Only)
3. Dry Level
To select the dry level in the NORMAL, HEAVY DUTY, or other Sensor Dry cycles, press the Dry Level button. An
indicator light will illuminate next to the desired dryness level.
Press the button repeatedly to scroll through the settings. Larger or bulkier loads may require the Very Dry or
More Dry setting for complete dryness.
The Less Dry setting is best suited for lightweight fabrics or for leaving some moisture in the clothing at the
end of the cycle. Damp Dry is designed to partially dry items. Use for items that lay flat or hang to dry.
DV6000HA_DC68-03380A.indd 24
To reduce statics by clothing friction and spray steam at the later period of drying
cycle.
It is only available with: NORMAL, HEAVY DUTY, PERM PRESS, DELICATES (Dry level of
every course exceeds Normal) and TIME DRY course.
In order to reduce statics, the drum can be paused during operation.
Rack Dry is available in the TIME DRY cycle. Temperature will be set to Extra Low only.
(Refer to the "Rack dry" section on page 28.)
The mixed load bell that notifies you when the average dry level in a load is damp
dry (80 % dried). This lets you take garments that you don't want fully dried or that
dry quickly out of the dryer early while letting others continue to dry.
You can select this function in all Sensor Dry cycles except WOOL, SANITIZE. The dry
level selections are limited to Normal Dry, More Dry, and Very Dry.
Wrinkle Prevent provides approximately 180 minutes of intermittent tumbling in
unheated air at the end of the cycle to reduce wrinkling. Press the Wrinkle Prevent
button to activate this feature.
The indicator light above the pad will illuminate when Wrinkle Prevent is selected.
The load is dry, and can be removed at any time during the Wrinkle Prevent cycle.
Choose your favorite cycle including cycle, temp, dry level option, etc. (Refer to the
"My Cycle" section on page 30.)
Time can be added or subtracted from the automatically set times in the Manual Dry
cycles (TIME DRY, QUICK DRY, or AIR FLUFF cycles) and WRINKLE AWAY cycle.
To add or subtract time from the cycle, press the Adjust Time arrow pad up or down
until the desired time is displayed.
To control operation rate for drying a small loads at Sensor Dry course.
It is only available with: NORMAL, HEAVY DUTY, PERM PRESS and DELICATES course.
It can't be selected/cancelled when the drying course is running.
In order to improve drying effect and control operation rate, the drum can be paused
during operation.
This function is available in the NORMAL, and TIME DRY cycles. When the Eco Dry
function is activated, drying takes longer but the power consumption is reduced.
(When the Eco Dry function is enabled, the drying time can be extended up to 3
times depending on the specified temperature and the amount of laundry to be
dried. When the product is shipped, the Eco Dry function is set to On by default.)
English - 24
2013-12-02 3:54:35