Publicité
Les langues disponibles
Les langues disponibles
PRODUCT IDENTIFICATION
Head Assembly
Magazine Assembly
HOW TO USE
Grasp the comfort grip and with a quick
movement, strike the surface squarely
(similar to using a hammer).
HOW TO LOAD
1. Push staple feeder assembly for-
ward and slide staple feed cap up-
ward (see Figure 1).
2. Pull staple feeder assembly out of
hammer tacker.
3. Insert strip of staples, points down,
into staple channel (see Figure 2).
4. Replace staple feeder assembly
into handle with U-channel facing
down.
Staple Feed Cap
Step 1
Push In
Figure 1 - Removing Staple Feeder
Assy.
www.desatech.com
5. Push forward and lock staple feed
HOW TO DISASSEMBLE
1. Remove staple feeder assembly
2. Using a 7mm wrench and a philips-
3. Grasp tool at the head assembly
Staple Feeder Assembly
Step 2
Figure 2 - Installing Staples and
Push Up
2
Staple Feed Cap
Comfort Grip
Hinge Screw/Nut
Staple Feeder Assembly
cap in place.
and staples as indicated in loading
instructions.
head screwdriver, remove nut from
hinge screw.
and compress magazine assembly
slightly (see Figure 3, page 3).
Magazine Assembly
Staple Feeder Assy.
Staples
(Points Down)
113267
Publicité
