Télécharger Imprimer la page

Philips AVENT SCF870 Mode D'emploi page 11

Masquer les pouces Voir aussi pour AVENT SCF870:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 24
Environment
-
Do not throw away the appliance with the normal household waste at the end of its life, but
hand it in at an official collection point for recycling. By doing this, you help to preserve the
environment (Fig. 21).
Storage
1
Empty the water tank before you store the appliance (Fig. 20).
2
Make sure all parts are clean and dry before you store the appliance (see chapter 'Cleaning').
3
Store the appliance with the blade unit in the jar to prevent damage.
4
Do not place the lid on the jar to avoid any bacterial growth.
guarantee and service
If you need service or information or if you have a problem, please visit the Philips AVENT website
at www.philips.com/AVENT or contact the Philips Consumer Care Centre in your country
(you find its phone number in the worldwide guarantee leaflet). If there is no Consumer Care
Centre in your country, go to your local Philips dealer.
troubleshooting
This chapter summarises the most common problems you could encounter with the appliance. If
you are unable to solve the problem with the information below, contact the Consumer Care
Centre in your country.
Problem
The appliance does not
work.
The steaming light does
not go on.
Ingredients do not heat
up completely.
The appliance does not
steam.
All manuals and user guides at all-guides.com
Possible cause
The appliance is equipped
with a safety lock. If the parts
have not been assembled
properly onto the motor
unit, the appliance does not
work.
The appliance is not
connected to the mains.
The jar is not properly
placed on the motor unit.
You want to start a second
steaming process just after
one has finished.
The pieces in the jar are too
big, there is too much food
in the jar or you have not
steamed the food long
enough.
You have not put water in
the appliance.
Solution
Assemble all parts properly. See chapter
'Using the appliance'.
Put the plug in the wall socket.
Place the jar properly on the motor
unit.
Switch off the appliance and allow it to
cool down for a few minutes before
you start a second steaming process.
Cut the food into smaller pieces,
decrease the amount of food in the jar
or select a longer steaming time.
Switch off the appliance and put the
right amount of water in the appliance.
EngliSh
11

Publicité

loading