Publicité
Les langues disponibles
Les langues disponibles
Installation
Adjusting the gap between the doors and the main body of the refrigerator
44
English
Untitled-6 44
A
B
You can adjust the gap between all
four doors and the main body of the
refrigerator using the adjustment dial.
(Refer to the figure for the location of the
adjustment dial.)
1. Open the door that is closer to the main
body than the others. Then, turn the
adjustment dial (A) counterclockwise
until the gap becomes even with the
others.
2. After adjusting the gap, turn the locking
nut (B) to lock the adjustment dial.
NOTE
Each time you turn the adjustment dial,
the gap is adjusted by 1 mm. However, the
door may not close properly if you adjust
the door by more than 1.5 mm.
2021-03-23
4:42:15
Publicité
