Télécharger Imprimer la page

Husqvarna PW 240 Manuel D'utilisation page 21

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 167
Transportation
Disconnect the power plug from the power source
before transportation of the product.
Disconnect the product from the water source before
transportation of the product.
Put the product horizontally during transportation.
Attach the product to prevent movement during
transportation.
Storage
Drain all water from the product, the high-pressure
water hose, and the accessories before you put the
product in storage.
Prepare the product for storage. Refer to
the product for storage on page 21 .
Keep the product in a dry and frost-free environment.
To prepare the product for storage
1. Stop the product and disconnect the power plug from
the power source.
2. Disconnect the product from the water source. Refer
To disconnect the product from the water source
to
on page 17 .
Motor and pump
Type
Power, W
Voltage range, V
Frequency, Hz
Rated current, A
Max. water flow, l/min
Max. water output pressure, bar/MPa
Max. water inlet pressure, bar/MPa
Max. water inlet temperature, °C/°F
Max. water inlet temperature (in suction mode), °C/°F
IP rating
Safety class
Lubrication
1855 - 008 - 02.05.2023
Transportation, storage and disposal
To prepare
Technical data
3. Make sure that all accessories are dry.
4. Put the spray handle, the spray lance, and the
nozzles in their holders.
5. Disconnect the high-pressure water hose from the
spray handle and wind the high-pressure water hose
on the hose reel. (Fig. 23)
6. Put the power cord on its holder and attach the
strap. (Fig. 52)
7. Fold the transport handle. Refer to
fold the transport handle on page 15 .
Disposal
Husqvarna products are not domestic waste and must
only be discarded as given in this manual.
Obey the local disposal requirements and applicable
regulations.
Recycle the product and package at an applicable
disposal location.
Speak to your local Husqvarna dealer for more
information on how to recycle and discard the
product.
PW 240
Series AC Motor
1800
220–240
50
7
7.7
140/14
10/1
40/104
20/68
IPX5
Class II
To unfold and
21

Publicité

loading