DGXDSDV111SMA-2KM/DGXDSDV112SMA-2KM - 2000m Digital AV Sender System
Installing your DigiSender® XD-2KM
Step 5 - Test your Setup Using the Test Mode
Your DigiSender® XD-2KM is set to Test Mode by default and will aid you in getting the best possible
picture and help identify any problems that may arise during installation.
1.
Switch on the source equipment (Satellite, Free-
view, DVD, VCR, etc.).
3.
Turn on the DigiSender® Receiver by pushing the
Power button on the front of the unit. The Power
Indicator will change from Red to Green to indicate
that the unit is switched on
Please read the instructions carefully prior to installation
All manuals and user guides at all-guides.com
2.
Turn on the DigiSender® Transmitter by pushing the
Power button on the front of the unit. The Power
Indicator will change from Red to Green to indicate
that the unit is switched on.
4.
Turn on the receiving TV, and select the SCART
channel (SCART version) or the HDMI channel
(HDMI version). This may be labelled as SOURCE,
INPUT, AV, AUX or
ENGLISH (EN)
.
Page 09