Bosch Universal Rotak 650 Notice Originale page 11

Switch off and remove plug
from mains before adjusting,
cleaning or if the cable is en-
tangled and before leaving the garden
product unattended for any period.
Keep the supply flexible cord away
from the cutting blades.
Wait until all machine com-
ponents have completely
stopped before touching
them. The blades continue to rotate
after the machine is switched off, a ro-
tating blade can cause injury.
Do not use the product in the
rain or leave it outdoors when
it is raining.
Beware electric shock hazard.
Keep supply flexible cord
away from cutting means.
Do not use a high-pressure
washer or a garden hose to
clean the machine.
Carefully check the area
where the tool is to be used
for wildlife and pets. Wildlife
and pets may be injured while the ma-
chine is in operation. Thoroughly
check the working area and remove
any stones, sticks, wires, bones and
foreign objects. When using the ma-
chine, ensure that no wildlife, pets or
small tree stumps are hidden in the
dense grass.
Bosch Power Tools
Operation
Never allow children or people unfa-
u
miliar with these instructions to use
the product. Local regulations may
restrict the age of the operator.
When not in use store the product
out of reach of children.
Never allow children, persons with
u
physical, sensory or mental limita-
tions or a lack of experience and/or
knowledge and/or people unfamiliar
with these instructions to use the
product. Local regulations may re-
strict the age of the operator.
Children should be supervised to en-
u
sure that they do not play with the
product.
Never work while people, especially
u
children, or pets are nearby.
The user is responsible for accidents
u
or hazards occurring to other people
or their property.
Do not wear open rubber shoes or
u
sandals when using the product. Al-
ways wear sturdy shoes and long
trousers. Do not use barefoot.
Thoroughly inspect the area where
u
the machine is to be used and re-
move all stones, sticks, wires, bones
and other foreign objects.
Before using, always visually inspect
u
to see that the blades, blade bolts
and cutter assembly are not worn or
damaged. Replace worn or damaged
blades and bolts in sets to preserve
balance.
English | 11
1 609 92A 5W8 | (15.07.2020)