Publicité
Les langues disponibles
Les langues disponibles
Deck Height
Deck Height
Adjuster
Index Holes
Spring Loaded
Deck Height
Adjustment Knob
Blade Control Handle
(Forward/Down To Engage,
Backward/Up To Disengage)
Figure 7
TONGUE OFFSET ADJUSTMENT
1.
Offset the tongue as follows:
a.
Lift the spring loaded tongue locking pin knob and turn
90 degrees to lock in the up/disengaged position.
b.
Position the tow bar at the desired numbered offset
hole on the deck mount degree plate.
See Figure 9 and Table 1.
c.
Lift the spring loaded tongue locking pin knob and turn
90 degrees to lock in the down/engaged position. Make
sure the pin engages completely.
NOTE: Hitch point of towing vehicle should be beyond edge
of rear tires for best towing performance.
BALL COUPLER HITCH ADJUSTMENT
1.
Remove hitch height adjustment pin and slide hitch up or
down in tube to reach desired height. See Figure 8.
NOTE: Ball coupler can be reversed on hitch to accomodate
different height ranges.
2.
Line up desired hole and replace pin.
Get parts online at www.getearthquake.com or call 800-345-6007 M-F 8-4:30 CST.
Adjuster
Foot Pad
Deck Mounted
Degree Plate
Figure 8
Figure 9
Table 1
Position
1
2
3
4
5
6
7
8
9
Operator Manual
Acreage
Rough Cut Mower
™
Tongue
Adjustable Ball
Coupler Hitch
Tongue Offset Guide
Offset (in)
49.8
39.4
27.0
14.0
0.0
14.0
27.0
39.4
49.8
15
Publicité
