Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
6. Prepare the apparatus according to the unit weight, kg/lb selec-
ting the weight units kg/lb/st pressing the button on the back of the
scale, marked with the word "UNIT"
NORMAL WEIGHT MODE
1. Gently place your feet on the surface of the scale to start the devi-
ce and wait for the symbol "0.0" to appear on the screen.
2. Place yourself in the centre of the platform and avoid sudden
movements, keep still and
without touching other objects, until the scale shows your weight.
The user must wait while the weight is being calculated. The scale
indicates that it has completed the weighing by flashing the final
value three times.
3. To save energy, the device goes into sleep mode after several
seconds of inactivity.
4. To return to normal operation, simply place your foot lightly on the
platform and wait for the symbol "0.0" to appear on the screen.
5. Replace the unit in a safe and stable place.
WEIGHT MODE WITH COMPOSITION INFOR-
MATION
1. This product enables you to obtain information regarding the
weight composition, indicating the corresponding values for body
mass index, bone, muscle, water, etc.
2. A user must first be set to obtain this information. This product
has a memory capacity for up to 10 users. In this report are stored
data on gender, age and height of the person, not the measurements
made with the product.
3. Press the SET button to configure a user. The corresponding user
number will flash on the display. To change user number use the up/
down buttons. Select the user confirming with SET button.
4. Then the icon to select the corresponding gender of the user will
flash. To change user gender use the up/down buttons. Press SET
again to confirm.
5. Then it will start to flash and the text AGE will appear to select
age. To select user age use the up/down buttons. Press SET again to
confirm.
6. Finally you must select the corresponding height using the up/
down buttons and indicate the height of the user in cm. Press SET
to confirm for the configured values for this user to appear on the
display. If you need to make any changes proceed in the same way
as to create the user.
7. Once the user is stored in the memory of the scale with gen-
der, age and height parameters, you must turn on the product by
pressing the SET button and scrolling through the memories using
the up/down buttons to the selected user to proceed to the reading.
All data on sex, age and height are displayed on the screen and then
"0.0" will be shown indicating that you can now weigh.
8. Gently place your bare feet on the surface of the scale to start
the device. You should ensure that your feet are in contact with the
metal electrodes of the product surface.
9. Place yourself in the centre of the platform and avoid sudden
movements, keep still and
without touching other objects, until the scale shows your weight.
The user must wait while the weight is being calculated. The scale
indicates that it has completed the weighing by flashing the final
value three times.
7
Publicité
