Publicité
Les langues disponibles
Les langues disponibles
Care and Cleaning
To keep nugget ice tasting fresh and ice maker performing
Descaling is recommended for removing hard mineral
depending on water hardness.
Sanitizing
water, cleaning schedule may need to be adjusted based
on hardness of water.
switching to distilled water is suggested. To clean the
soft cloth dampened with soapy water to gently clean the
System Descaling / Sanitizing Procedure
1. Unplug Opal.
4. Descaling:
or use the Opal Cleaning Kit and follow instructions
provided.
Sanitizing:
and then adding one teaspoon of bleach.
5. Pour solution into water reservoir, up to the fill line
indicator light will turn off.
NOTE:
8. Descaling: run the clean cycle up to 3 times and then
let the unit sit for 18 hours and soak. While the unit is
soaking, dip a cloth in the solution and wipe the inner
walls. Use a cotton swab to clean any cracks. When
you are done, rinse the cloth with clean water and wipe
process for very heavy scale deposits.
Sanitizing: once the Cleaning indicator turns off,
promptly drain the Opal.
49-9000029 Rev. 5
clean the reservoir. Use a soft cloth moistened with water.
WARNING
cleaning with bleach, use bleach in a well ventilated area
WARNING
Unplug the product before cleaning by
hand, and when not in use.
Clean
Hold 3 Sec
Making Ice
Defrosting
Water
Light
Power
Add Water
Cleaning
7
Publicité
