Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
Before cleaning the waffle cone maker, always unplug the power cord. Wait until the
waffle cone maker cools to room temperature. Never clean the appliance under water.
If you find it necessary to clean the baking surface use a soft brush, a moist Q-tip,
or a flexible moist cloth. Never use sharp or pointed tools as they will damage the
anti-stick surfaces. The exterior can be safely cleaned with a mild detergent on a damp
soft cloth, a Q-tip, or small soft brush. Then use a dampened cloth followed by drying
with a dry soft cloth.
Store the power cord under the bottom as shown in Figure 7. You will find it is easy to
store vertically resting on the top hinged face as shown.
Clip
Clip
Cord snaps into
plastic retainer
slot
Figure 7. Cord clips under base. Waffle Cone Maker stores upright as shown.
This appliance is for household use only. No user-serviceable parts are inside.
Refer servicing to qualified personnel.
In the event service is needed, return your waffle cone maker to The Legacy
Companies, where the cost of repair or electrical or mechanical adjustment can be
estimated before the repair is undertaken. If failure occurs within the warranty period
there may be no charge.
Please include your return address and a brief description of the problem or damage
to the waffle cone maker on a separate sheet inside the box.
149 Cleveland Drive, Paris, KY 40361 U.S.A.
Engineered in the U.S.A.
This product may be covered by one or more EdgeCraft® patents and/or patents pending as marked on the
®
product. Chef'sChoice
®
EdgeCraft
Corporation.
Conforms to UL Std. 1083
© 2020 The Legacy Companies
E20
CLEANING AND STORAGE
The Legacy Companies
Consumer Support 1-800-342-3255
®
, EdgeCraft
, and the overall design of this product are registered trademarks of the
E/F/S
SERVICE
English — 10
Clip
Loop cord here
Loop cord here
chefschoice.com
W838620
Publicité
