Publicité
Les langues disponibles
Les langues disponibles
1. Separating the VESA Plate from the Wall Mount
2a. Mounting the wall plate into wooden studs
* Make sure that the mounting screws are anchored into the center of the studs. The use of a stud finder is highly
recommended.
* It is recommended to use a drill driver to tighten bolts. Tighten bolts so that the wall plate is firmly attached to
the wall, but DO NOT over-tighten. The bolts can be damaged by over-tightening which will strip their
threading.
3
All manuals and user guides at all-guides.com
remove
Drill pilot holes
EM-A400.LU.032014.IM
Publicité
