PLEASE READ THESE INSTRUCTIONS CAREFULLY AND KEEP FOR FUTURE REFERENCE! IF YOU
DO NOT UNDERSTAND THE INSTRUCTIONS, OR DO NOT FEEL THAT YOU CAN FOLLOW THEM
SAFELY, CONTACT A QUALIFIED CONTRACTOR. THE WARRANTY WILL BE HONOURED IF
ACCOMPANIED BY AN ORIGINAL SALES RECEIPT, AND ONLY IF THE INSTRUCTIONS HAVE BEEN
FOLLOWED EXACTLY.
1-866-604-6966.
•
The IM-TLB2 is designed to mount a panel onto a vertical wall. Hardware for mounting to a wood stud is included. For
mounting to any other surface, it is recommended you contact a qualified contractor.
•
The wall or mounting surface must be capable of supporting the combined weight of the mount and the flat panel,
otherwise the structure must be reinforced.
•
Safety gear and proper tools must be used. A minimum of two people are required for this installation. Failure to use
safety gear and/or attempting this installation alone can result in property damage, serious injury, or death.
•
Follow all instructions and recommendations regarding adequate ventilation and suitable locations for mounting your
flat panel. Consult the owner's manual of your flat panel for more information.
•
This product will hold flat panels up to 60" and weighing up to 165 lbs.
•
VESA 600mm x 400mm
Tools Required
•
Phillips head screwdriver
•
M8 socket and wrench
•
Electric drill and 10mm masonry bit for concrete wall installation
•
Pencil
•
Hammer
•
Stud finder
A
Wall plate
x1
F
M6/M8 washer
x8
K
M8 lock washer
x4
P
M5x30
x4
www.everik.com
All manuals and user guides at all-guides.com
Instructions
To acquire missing parts please visit www.everik.com/parts.html or call
B
Adaptor brackets
x2
G
M8 washer
x6
L
M8 spacer
x4
Q
M6x15
x4
PARTS LIST
C
Lag bolt
Concrete anchor
x6
x6
H
M4 lock washer
M5 lock washer
x4
x4
M
M4x15
M4x30
x4
x4
R
M6x30
M8x25
x4
x4
Model:
IM-TLB2
EZ-2000
D
E
M4/M5 washer
x8
I
J
M6 lock washer
x4
N
O
M5x15
x4
S
T
M8x40
x4
TLB2.EZ2000.LU.102011.IM