Publicité
Les langues disponibles
Les langues disponibles
Liens rapides
PLEASE READ THESE INSTRUCTIONS CAREFULLY AND KEEP FOR FUTURE REFERENCE! IF
YOU DO NOT UNDERSTAND THE INSTRUCTIONS, OR DO NOT FEEL THAT YOU CAN
FOLLOW THEM SAFELY, CONTACT A QUALIFIED CONTRACTOR. THE WARRANTY WILL BE
HONOURED IF ACCOMPANIED BY AN ORIGINAL SALES RECEIPT, AND ONLY IF THE
INSTRUCTIONS HAVE BEEN FOLLOWED EXACTLY.
http://www.everik.com/en-CA/Parts-Request.html
• These mounts are designed to mount a panel onto a vertical wall. Hardware for mounting to a
wood stud is included. For mounting to any other surface, it is recommended you contact a
qualified contractor.
• The wall or mounting surface must be capable of supporting the combined weight of the mount
and the flat panel, otherwise the structure must be reinforced.
• Safety gear and proper tools must be used. A minimum of two people are required for this
installation. Failure to use safety gear and/or attempting this installation alone can result in
property damage, serious injury, or death.
• Follow all instructions and recommendations regarding adequate ventilation and suitable locations
for mounting your flat panel. Consult the owner's manual of your flat panel for more information.
• This product will hold flat panels up to 55" and weighing up to 77 lbs.
• VESA 400mm x 400mm
Tools Required
• Phillips head screwdriver
• M6 socket and wrench
• Electric drill and 10mm masonry bit for concrete wall installation
• Pencil
•
Hammer
•
Stud finder
1
All manuals and user guides at all-guides.com
INSTRUCTIONS
or call 1-866-604-6966.
To acquire missing parts please visit
EM-A400
EM-A400.LU.032014.IM
Publicité
Manuels Connexes pour Everik EM-A400
Sommaire des Matières pour Everik EM-A400
- Page 1 All manuals and user guides at all-guides.com EM-A400 INSTRUCTIONS PLEASE READ THESE INSTRUCTIONS CAREFULLY AND KEEP FOR FUTURE REFERENCE! IF YOU DO NOT UNDERSTAND THE INSTRUCTIONS, OR DO NOT FEEL THAT YOU CAN FOLLOW THEM SAFELY, CONTACT A QUALIFIED CONTRACTOR. THE WARRANTY WILL BE...
- Page 2 M4 (1) M6 (8) Allen key (1) Cable dip (1) Package M Package M4 x 14 M5x14 M6x14 M8x20 M6x30 M8x30 M4 x 14 D6 washer D8 washer Small spacer Large spacer Package W ST6.3x55 Concrete anchor D6 washer EM-A400.LU.032014.IM...
- Page 3 * It is recommended to use a drill driver to tighten bolts. Tighten bolts so that the wall plate is firmly attached to the wall, but DO NOT over-tighten. The bolts can be damaged by over-tightening which will strip their threading. EM-A400.LU.032014.IM...
- Page 4 * It is recommended to use a drill driver to tighten bolts. Tighten bolts so that the wall plate is firmly attached to the wall, but DO NOT over-tighten. The bolts can be damaged by over-tightening which will strip their threading. EM-A400.LU.032014.IM...
- Page 5 All manuals and user guides at all-guides.com 3. Installing the Decorative Covers *Insert both top and bottom plastic covers then insert the middle decorative cover 4. Assembling the VESA Adaptors EM-A400.LU.032014.IM...
- Page 6 VESA plate 5b. For recessed back panels or to access A/V inputs. M4 X 14 Note: Choose the appropriate screws, washers and spacers according to the type of panel. Tighten all screws, but do not over tighten. EM-A400.LU.032014.IM...
- Page 7 All manuals and user guides at all-guides.com 6. Hanging your panel onto the Wall Plate *Using two people, lift panel slowly and hook the VESA plate onto the Articulated arm assembly (A) 7. Cable Management EM-A400.LU.032014.IM...
- Page 8 All manuals and user guides at all-guides.com 8. Final Adjustments EM-A400.LU.032014.IM...
- Page 9 QUALIFIÉ. LA GARANTIE NE SERA HONORÉE QU'EN LA PRÉSENCE DU COUPON DE CAISSE ORIGINAL ET UNIQUEMENT SI LES INSTRUCTIONS ONT ÉTÉ SUIVIES À LA LETTRE. Pour obtenir des pièces manquantes, visitez www.everik.com/parts.html ou téléphonez au 1 866 604-6966. • L'IM-ALB3 est conçu pour fixer un moniteur sur un mur vertical. Le matériel servant au montage sur mon- tant de bois est inclus.
- Page 10 M4 (1) M6 (8) Clé Allen (1) Passe-câbles (1) Package M Package M4 x 14 M5x14 M6x14 M8x20 M6x30 M8x30 M4 x 14 Rondelle D6 Rondelle D8 Cale (petit) Cale (grand) Package W ST6.3x55 Cheville pour béton Rondelle D6 EM-A400.LU.032014.IM...
- Page 11 * L'utilisation d'une perceuse-visseuse pour visser les boulons est recommandée. Serrez les boulons de sorte que la plaque murale soit fermement fixée au mur, mais NE les serrez PAS trop fort. Cela pourrait endommager les boulons et en abîmer le filetage. EM-A400.LU.032014.IM...
- Page 12 * L'utilisation d'une perceuse-visseuse pour visser les boulons est recommandée. Serrez les boulons de sorte que la plaque murale soit fermement fixée au mur, mais NE les serrez PAS trop fort. Cela pourrait endommager les boulons et en abîmer le filetage. EM-A400.LU.032014.IM...
- Page 13 All manuals and user guides at all-guides.com 3. Installation des plaques décoratives *Insert both top and bottom plastic covers then insert the middle decorative cover 4. Assemblage des adaptateurs VESA EM-A400.LU.032014.IM...
- Page 14 5b. Pour les écrans à dos concave ou pour accéder aux connexions A/V M4 X 14 Remarque : Choisissez les vis, rondelles et cales appropriés en fonction du type d'écran plat. Assurez-vous de bien serrer les vis, mais ne les serrez pas trop fort. EM-A400.LU.032014.IM...
- Page 15 Branchez les câbles sur le téléviseur en les faisant passer à travers le passe-câble, puis fixez le cache-câbles pour les maintenir en place. Remarque : prévoyez une longueur de câble suffisante pour accommoder le mouvement du bras articulé. EM-A400.LU.032014.IM...
- Page 16 All manuals and user guides at all-guides.com 8. Derniers ajustements En fonction du poids de votre téléviseur, vous devrez visser ou dévisser légèrement la vis de réglage au moyen de la clé Allen fournie. Réglez l'emplacement désiré ou l'inclinaison EM-A400.LU.032014.IM...