Beats Beatbox Mode D'emploi page 21

All manuals and user guides at all-guides.com
UK English
Problem What to do
• Carefully check if the back plate of the ampliåer is
My
hot. If the Beatbox has been running at its highest
Beatbox™
suddenly power output for an extended period, the amplifer may
stopped have overheated and the protection circuitry has
shut down the Beatbox temporarily. Your Beatbox
working
and the provides maximum protection from amplifer
red LED is overdrive and overheating. Switch off the Beatbox
ashing. and wait 30 minutes to let the back plate cool down.
Switch the power back on.
• Raise the volume to check that it is operating normally.
• If the Beatbox is still not responding, contact
the dealer you purchased it from, or Beats.
/ • Make sure you have the power cord properly
My iPod ®
iPhone connected on the back of the unit.
®
does not
• Make sure you have the power cord plugged
charge up.
into a working AC outlet.
• Remove your iPod/iPhone from the dock.
Wait 5 seconds. Then reseat your iPod/iPhone.
19