Publicité
Les langues disponibles
Les langues disponibles
2
appliance description
1.
Speed control
2.
On button
3.
Turbo button
4.
Motor part
5.
Blender shaft
3
before first use
Before using the appliance for the first time, please do as
follows: carefully unpack the appliance and remove all the
packaging material.
Warming: the blade of the blender
shaft is extremely sharp. Keep the material (plastic bags and
cardboard) out of reach of children. Check the appliance after
unpacking for any damage, possible from transportation.
Rinse the blender shaft with warm soapy water and dry it
thoroughly.
Wipe the motor part and the connector with a damp cloth.
Do not use any abrasive detergents. These can damage the
housing.
Always roll out the cord completely. Make sure that all the parts
are dry before you use the appliance.
10
•
English
MX300-instructions.indd 10
All manuals and user guides at all-guides.com
4
• Take the motor part and the blender shaft.
• Check whether the speed control is set on the
• Plug in the appliance.
• Lower the stick mixer into the food.
• Press the TURBO button for maximum speed
• As soon as you release the button (on or
• When you have finished mixing or blending
The SPEED CONTROL is adjustable. By sliding the knob from
right to left, the speed increases.
lowest speed = knob to the right
fastest speed = knob to the left
5
using the stick mixer
Warning: the blade of the blender shaft is extremely
sharp.
Attach the blender shaft to the motor part by
turning the blender shaft clockwise. To loosen
it, turn the blender shaft the other way.
lowest speed - to the right.
or press the ON button to use the speed
setting you can set on top of the motor part.
turbo), the stick mixer will stop.
and released the button, wait until the knives
have stopped turning, before approaching the
blender shaft with your hands.
1
2
3
4
15-12-2014 12:24:13
Publicité
