Philips HQ642 Mode D'emploi page 11

All manuals and user guides at all-guides.com
C
2
1
C
Do not clean more than one cutter and guard at
a time, since they are all matching sets. If you
accidentally mix up the cutters and guards, it
could take several weeks before optimal shaving
performance is restored.
B
Damaged or worn shaving heads (cutters and
guards) may only be replaced with original HQ6
Philishave Quadra shaving heads.
Remove the retaining frame from the shaving
unit by turning the wheel anticlockwise.
Remove the shaving heads from the shaving
unit.
Remove the hairs from the cutters and the
guards with the brush supplied.
Put the shaving heads back into the shaving
unit. Put the retaining frame back into the
shaving unit, press the wheel and turn it
clockwise.
Cause 3: the shaving heads are damaged or worn.
Remove the retaining frame.
Remove the old shaving heads from the
shaving unit and replace them with new ones.
Put the retaining frame back into the shaving
unit, press the wheel and turn it clockwise.
ENGLISH
11