Publicité
Les langues disponibles
Les langues disponibles
EnglisH
10
8
Clean all removable parts immediately after use (see chapter 'Cleaning').
Mill
This blender is supplied with two mills:
-
The dry mill (the smaller one) is intended for grinding dry ingredients, such as dried beans, dried
rice, dried shrimps or dry tea leaves.
-
The wet mill (the larger one) is intended for chopping moist ingredients, such as chili paste and
soaked rice.
Using the mill
1
Put the ingredients in the mill beaker (Fig. 9).
Do not fill the mill beaker beyond the MAX indication.
2
Assemble the sealing ring on the blender blade unit (dry mill) or assemble the sealing ring on
the wet mill blade unit (wet mill). (Fig. 2)
3
Put the dry mill blade unit on the dry mill beaker (1) or put the wet mill blade unit on the
wet mill beaker (1) and screw the blade unit anticlockwise (2) until it is fixed
properly. (Fig. 10)
4
Turn the assembled mill upside down and screw it clockwise onto the motor unit
('click') (Fig. 11).
5
Put the mains plug in the wall socket.
6
Turn the control knob to the PULSE setting to let the blender run until the ingredients are
fine enough.
This takes approx. 10-30 seconds.
Disassembling the mill
1
Unplug the blender.
2
Screw the mill anticlockwise off the motor unit.
3
Turn the mill upside down and screw the blade unit clockwise off the mill beaker.
4
Clean all removable parts immediately after use (see chapter 'Cleaning').
Cleaning
Always unplug the appliance before you clean it.
Never immerse the motor unit in water, nor rinse it under the tap. Do not clean the motor unit
in the dishwasher.
Never use scouring pads, abrasive cleaning agents or aggressive liquids such as petrol or acetone
to clean the appliance.
Tip: Cleaning the blender and its parts is easiest immediately after use.
Easy cleaning
1
Leave the blender jar on the motor unit.
2
Fill the blender jar halfway with water and add a few drops of washing-up liquid.
3
Turn the control knob to the CLEAN/PULSE setting a few times.
4
Remove the blender jar from the motor unit, empty it and rinse it with clean water.
All manuals and user guides at all-guides.com
Publicité
