Publicité
Les langues disponibles
Les langues disponibles
Eutech Electronics S.r.l.
Via dei Gelsi 19, 31010 Godega di S.U. (TV) - ITALIA
Tel. +39 0438 1910012
www.bebsmarthome.it
info@eutechelectronics.it
Made in Italy
FACILE-MF
USER MANUAL
FACILE-MF is a 4 channels remote control with its own Rolling-code (G code) that allows you to manage compatible automations,
moreover, thanks to advanced functions it is able to duplicate fixed code and Rolling-code remote controls from 433.92 MHz to 868 MHz
present in the compatibility list downloadable from our website. The duplication allows to associate to each button of the FACILE-MF an
original remote controls button of different models and brands.
DUPLICATION OF FIXED CODE AND ROLLING-CODE REMOTE CONTROLS
This procedure allows you to duplicate different models of fixed code and Rolling-code remote controls.
Step 1: press and hold button 1 of the FACILE-MF, then press button 2 four times (Pic.1). When the LEDs start flashing in sequence,
release both buttons and position the remote control to be duplicated in front of the FACILE-MF.
Step 2 (follow the procedure based on the type of original remote control you have):
Remote controls Fix
Code and Rolling-code:
Keep the button of the
original remote control
pressed until the LEDs of
the FACILE-MF all start
flashing at the same time
(Pic. 2). This operation
may take a few seconds
depending on the type of
remote control being
duplicated.
Now press the FACILE-
MF button in which you
want to insert the original
code just learned and
wait for the
corresponding LED turn
off. Example: in Pic. 3 the
original remote control
code is stored in button 1
of the FACILE-MF.
Step 3: Copying was successful. For correct use of the FACILE-MF remote control, refer to the automation instruction manual.
NOTE: If the code has not been learned correctly, the LEDs relating to buttons 1-2-4 of the FACILE-MF light up at the same time, repeat
the operation from Step 1. The memory of the FACILE-MF is completely rewritable, therefore it is possible overwrite more buttons.
Remote controls BFT:
Keep the button of the original
remote control pressed until
the LED corresponding to
button 2 of the FACILE-MF
stays on for about 3 seconds,
then it starts to flash (Pic. 4).
Now send the SEED (source
code) of the BFT remote
control by pressing the hidden
button on the back or, in the
case of more recent models,
by simultaneously pressing
buttons 1 and 2 until the LEDs
of the FACILE-MF all flash
simultaneously (Pic. 5). Now
press the FACILE-MF button
in which you want to insert the
original code just learned and
wait for the corresponding
LED turn off.
Example: in Pic. 6 the original
remote control code is stored
in button 1 of the FACILE-MF.
Remote controls
FAAC/GENIUS 433-868MHz:
Keep the button of the original
remote control pressed until the
LED corresponding to button 2
of the FACILE-MF stays on for
about 3 seconds, then it starts
to flash (Pic. 4). Now send the
SEED (source code) of the
FAAC / GENIUS remote control
by pressing buttons 1 and 2 at
the same time (Pic.5), then
press the button you want to
duplicate, until the FACILE-MF
LEDs all flash simultaneously.
Now press the FACILE-MF
button in which you want to
insert the code just learned and
wait for the corresponding LED
turn off.
Example: in Pic. 6 the original
remote control code is stored in
button 1 of the FACILE-MF.
Remote controls V2
433-868MHz:
Keep the button of the original
remote control pressed until the
LED corresponding to button 2
of the FACILE-MF stays on for
about 3 seconds, then it starts
to flash (Pic. 4). Now send the
SEED (source code) of the V2
remote control by pressing
buttons 1 and 2 at the same
time until the LEDs of the
FACILE-MF all flash
simultaneously (Pic. 5).
Now press the FACILE-MF
button in which you want to
insert the code just learned and
wait that the corresponding LED
turn OFF. Example: In Fig. 6
the code of the original remote
control is stored in key 1 of the
FACILE-MF.
EN
V:2.0.1
Publicité
