Publicité
Les langues disponibles
Les langues disponibles
2. Preparations (continued)
Connecting the AC adapter
It is possible to supply power to the KY-F75 from the computer via the IEEE1394 cable, but
when a motorized lens, etc., is used, the DC cable should be used to connect the KY-F75's [DC
IN] connector and the [TO CAMERA] connector on the AC adapter (AA-P700).
AA-P700
AC 100V
White marking
Connect the end with the
white marking to the AC
adapter
CAUTION
• Be sure to use the AA-P700 AC adapter.
Make sure that the power switch on the AA-P700 AC adapter is set to OFF before connections are
made. Making connections while the power is ON could result in damage to the KY-F75.
Connecting the DC power cable and attaching the filter clamp
Clamp filter
Plug
E16
All manuals and user guides at all-guides.com
AC adapter
(separately sold)
DC 12V=OUTPUT
VIDEO OUTPUT
S(Y/C) OUTPUT
TO CAMERA
EITHER
SEE INST-
OUTPUT
RUCTION
MAX 1.25A
MANUAL
TO CAMERA
connector
● After inserting the plug completely, tighten the se-
Ring
● To reduce the emission of unwanted radio waves,
● Attach the clamp filter as close as possible to the
REMOTE
POWER
SEE INSTRUCTION MANUAL
DC cable (2 m)
(separately sold)
curing ring
make sure to attach the provided clamp filter as
shown in the figure on the left. Wind the cable once
around the clamp filter.
KY-F75 as shown in the figure.
LENS
IEEE1394
DC IN
Functional
earth
DC IN
connector
Clamp filter
(supplied)
Publicité
