Publicité
Les langues disponibles
Les langues disponibles
4.11 End of programming
5. Connections
1 10 – 30 V DC
2 GND
3 GND
4 LATCH
5 0 (4) – 20 mA DC
6 Analog GND
7 0 (2) – 10 V DC
6. Technical data
Anzeige: Display:
5digit 7 segment red
LED-Display,
8 mm high characters
Range of input signals
0 .. 10 V DC
2 .. 10 V DC
0 .. 20 mA DC
4 .. 20 mA DC
Linearity:
< 0.1% ± 1 digit at an
ambient temperature of
20 °C
Zero adjustment:
Temperature drift: <70ppm/K
Measuring rate:
0,5 Measurement/sec ...
2 Measurement/sec
Current measuring:
Voltage drop:
max. 2,0 V at 20 mA
Current limitation: 50 mA
Programming routine will
be passed through once
again. All parameters
can be checked.
Programming routine will
be left and the new para-
meters will be stored. Af-
terwards the device is
ready to use.
automatic
Voltage measurement:
Input resistance: >1 MΩ
Elimination of power line hum:
digital filter at 50 Hz
Supply voltage:
10...30 VDC,
galvanically isolated
Current consumption:
max. 50 mA
Ambient temperature:
-10°C ... +50°C
Storage temperature:
-25°C ... +70°C
Data retention:
via EEPROM 1 Mio.
memory cycles or 10 years
Weight:
ca. 50 g
Protection:
IP 65 (front)
EMC:
EN 61 000-4-2/EN 55011 Klasse B
EN61000-6-2
Cleaning:
The front of the unit is only to be cleaned
with a soft wet (water !) cloth.
Error messages:
Err 0*
Error/defect in A/D-part
Err 3*
Error/defect EEPROM
Err 4**
Analogue input overflow
Err 5*
Error/defect EEPROM.
Device not calibrated
* Please send the device back for checking
** Please check input signal and programming
7. Delivery includes:
- Digital display with analogue inputs
- Panel mounting clip
- Bezel for screw mount, panel cut-out
50x25 mm
- Bezel for clip mount, panel cut-out
50x25 mm
- Sealing
- Tack dry symbols
11
Publicité
