Publicité
Les langues disponibles
Les langues disponibles
A copy of the above code standards can be obtained from:
Canadian Standards Association
178 Rexdale Blvd.
Toronto, ON M9W 1R3 CANADA.
The electrical power to the oven branch circuit must be shut off while line
connections are being made.
Do not use an extension cord with this appliance.
Electrical ground is required on this appliance. The free end of the green
wire(The ground wire) must be connected to a suitable ground. This wire
must remain grounded to the oven.
If cold water pipe is interrupted by plastic, non metallic gaskets, union
connections or other insulating materials, DO NOT use for grounding.
DO NOT ground to a gas pipe.
DO NOT have a fuse in the NEUTRAL or GROUNDING circuit. A fuse in
the NEUTRAL or GROUNDING circuit could result in an electrical shock.
Check with a qualified electrician if you are in doubt as to whether the
appliance is properly grounded.
Failure to do so could result in death, fire or electric shock.
Electrical Connection
To properly install your oven, you must determine the type of electrical connection
you will be using and follow the instructions provided for it here.
• Oven must be connected to the proper electrical voltage and frequency as
specified on the model/serial number rating plate. The model/serial number
rating plate is located at the back of the oven. All models are dual rated, and
designed to be connected to 240V AC, 60Hz, 3-wire or 4-wire, singlephase
power supply.
Australia:
ozmyhomeappliances@gmail.com
www.gaslandchef.com.au
WARNING
ELECTRICAL SHOCK HAZARD
United States:
1(844) 538-7890
www.gaslandchef.com
06
Publicité
