Publicité
Les langues disponibles
Les langues disponibles
Step 4 - Make Electrical Connection
To properly install your oven, you must determine the type of electrical connection
you will be using and follow the instructions provided for it here.
Direct Wire
Disconnect power before servicing.
Improper connection of aluminum house wiring and copper appliance
leads can result in an electrical hazard or re. If the home has aluminum
wiring, only use connectors designed and UL listed for joining copper to
aluminum and precisely follow the manufacturer's recommended
procedure. Aluminum-toCopper connections must conform with local
codes.
For Single Oven, use 10 gauge copper or aluminum wire.
For Double Oven, use 8 gauge copper or aluminum wire.
Electrically ground oven.
Failure to do so can result in death, re or electrical shock.
Be sure your appliance is properly installed and grounded by a qualified
technician. Ask your dealer to recommend a qualified technician or an authorized
repair service.
This oven is manufactured with a neutral(White) power supply wire and a
cabinetconnected green(Or bare) ground wire twisted together.
After making sure that the power has been turned off, connect the flexible conduit
from the oven to the junction box using a UL listed conduit connector.
The Grounded Neutral and Ungrounded Neutral Graphics on the following pages
and the instructions provided, present the most common way of connecting
ovens. Your local codes and ordinances, of course, take precedence over these
instructions. Complete electrical connections according to local codes and
ordinances.
Australia:
ozmyhomeappliances@gmail.com
www.gaslandchef.com.au
WARNING
ELECTRICAL SHOCK HAZARD
United States:
1(844) 538-7890
www.gaslandchef.com
10
Publicité
