Publicité
Les langues disponibles
Les langues disponibles
Tools And Parts
Gather the required tools before starting installation. Read and follow the instruc-
tions provided with any tools listed here.
All Installations
Tools needed:
• Measuring Tape
• Straightedge
• Pencil
• Phillips Screwdriver
• Level
• Wire Cutters and Wire Stripper
• Hand or Sabre Saw
• 1" Hole Saw
• Cordless Drill and Drill Bit
• Safety Gloves and Goggles
• Volt Meter(0-250VAC)
Parts needed:
• UL Listed Conduit Connector
• UL Listed Wire Connectors
Parts provided:
• #8-14 x 1" Screws - Single Ovens(2), Double Ovens(4)
Location Requirements
Important: Observe all governing codes and ordinances.
• Cabinet opening dimensions that are shown must be used. Given dimensions
provide minimum clearance with oven.
• Recessed installation area must provide complete enclosure around the
recessed portion of the oven.
• The oven support surface must be solid, level and flush with the bottom of the
cabinet cutout.
Australia:
ozmyhomeappliances@gmail.com
www.gaslandchef.com.au
United States:
1(844) 538-7890
www.gaslandchef.com
02
Publicité
