The LED light source (5) contains two Royal Blue LEDs and one UV LED
behind a protective Plexiglas pane.
Royal Blue LED: Wavelength range of 425 - 470 nm (peak 450 nm).
UV LED: Wavelength range of 350 - 375 nm (peak 365 nm).
Stand (6)
The stand (6) is used to secure the unit.
Function button (7)
The multifunction button (7) is used to switch the LED light source (5) on
and off. As soon as the function button is pressed and the light is active,
the exposure time indicator (11) will light up or start to blink.
Protective shield (8)
Attaching the protective shield prevents uncontrolled light emission
from the LED light source (5).
8
LED indicators
10
11
9
Power supply indicator
10
Charge level indicator
11
Exposure time indicator
Power supply indicator (9)
The red LED (9) on the back of the device shows the power
supply status:
Power supply indicator
LED off
Steady light
9
TwinLux Dual
No power supply
Battery is charging