Télécharger Imprimer la page

ABB Elos Serie Mode D'emploi page 16

Masquer les pouces Voir aussi pour Elos Serie:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

All manuals and user guides at all-guides.com
• Thank you for selecting this ABB product.
ABB products have been designed with attention to detail and built using only
the very best materials. ABB products will guarantee excellent and
lasting performance.
• The installer is kindly requested to fill out this leaflet and then hand it to the end
user, asking that he/she carefully read it.
• Carefully read the instructions below as they provide important information on
how the gas detector works, how it should be fitted and serviced (routine and
extraordinary maintenance) and what to do with it once it reaches the end of
its expected life.
• The manufacturer may not be held liable for injury to persons or pets or dama-
ge caused by the use of the gas detector in situations and conditions other than
those indicated in the instructions below.
• The manufacturer may not be held liable in the case that the detector is sold in
non-original packaging. Immediately after removing the product from its packa-
ging, make sure that it is not damaged.
• Make sure that the main power supply has been switched off before attempting
to fit the device or touch the wiring.
• The gas detector will only work when plugged in to the mains. A device has a
one minute delay after a blackout or during installation, during which time its
electronic components are reset (see how it works - page 26).
• The sensor reaches full efficiency after 10 days from plugging in.
• Check that the detector is suitable for the type of gas it is expected to detect.
• Before connecting the detector, make sure that the data on its ratings plate
match the mains supply.
• Connect the detector as indicated in the drawings on page 23.
• All products must be fitted in compliance with HD 384 - IEC 364 standards for
domestic appliances and similar devices, in dust-free areas and where there is
no need for special water-proofing protection.
• Always contact an authorised technician if the detector is faulty and/or malfunc-
tions and in the case of extraordinary maintenance and scrapping (see
page 25).
ATTENTION - IMPORTANT
16

Publicité

loading

Ce manuel est également adapté pour:

2cse1220el