Taurus LIQUAJUICE LS-651 BM Mode D'emploi page 7

All manuals and user guides at all-guides.com
English
Juicer
Liquajuice LS-651 BM
DESCRIPTION
A Pusher
B Feeding tube
C Juice auger
D1 Filter
D2 Spinning Brush
E Juicer bowl
F Base
G Residue exit
H Juice exit
I Jugs (one to collect residue and one to collect
juice)
J On/Off /Reverse button (3 positions)
K Reverse function
L Juice tap
M Rubber Stopper
USE AND CARE:
- Fully unroll the appliance's power cable before
each use.
- Do not use the appliance if the parts are not
properly fitted.
- Do not use the appliance if the switch does not
work.
- Do not move the appliance while in use.
- Store this appliance out of the reach of children
and/or those with reduced physical, sensory or
mental abilities or those unfamiliar with its use
- To push the food, always use the food pusher.
Never use your fingers or other accessories.
- Never leave the appliance connected and unat-
tended if is not in use. This saves energy and
prolongs the life of the appliance.
- Do not use the appliance for more than 30
minutes at a time. In case of operate in cycles,
allow the appliance a resting period of at least
15 minutes between each cycle. Under no cir-
cumstances should the appliance be operated
for more time than necessary.
- Do not use the appliance with frozen goods, ice
or those containing bones.
INSTRUCTIONS FOR USE
BEFORE USE:
- Make sure that all the product's packaging has
been removed.
- Before using the product for the first time, clean
the parts that will come into contact with food in
the manner described in the cleaning section.
USE:
ASSEMBLING
- Unroll the cable completely before plugging it in.
JUICE TAP (L)
- It can be fixed onto the juice outlet, simply close
the tap while juicing until the juicing bowl is
approximately 1/2 full. Then open the juice tap
allowing the juice flow into the juice pitcher/jug.
The juice tap can also be effect on reducing
froth and foaming in some juice & self clean.
- IMPORTANT: Prior to asembling the juicer,
please check this point : at the main Body of
the juicing bowl there is a rubber stopper (M)
(see fig 1). When in place, the Rubber stop-
per ensures all the juice only exits via the
juice outlet (H). Before juicing always ensure
that the rubber stopper (M) is firmly in place
- Put the juicer bowl (E) on the base (F) Inserting
the slot and rotating slightly clockwise to stop
(until faced arrows)
- Place the strainer (D1) into the spinning brush
(D2), align the arrow on the strainer and keep
in line with the arrow on the juicing bowl, then
insert strainer together with the spinning brush
into the juicing bowl. When the arrows are
correctly aligned the strainer and spinning brush
will lock in place
- Put the juice auger (C) into the filter (D1). Push
down and turn until it drops into position
- Place the feeding tube (B) onto the juice bowl
(E), making sure it is well fitted. To do it, align
the arrow (with open lock) on the feeding tube
(B) with the arrow on the juicing bowl (E) tur-
ning clockwise , toward the closed lock position
until arrows are aligned
- ATTENTION: If the auger (C) is not fully
inserted, the cover will not close properly.
Make sure the auger is well placed, turning
and pressing down
- If feeding tube is not well closed, device won't
operate properly