Publicité
Les langues disponibles
Les langues disponibles
To connect to audio equipment with a digital input
You can enhance the sound quality by connecting the unit's DIGITAL OUT (optical) to the digital input of an amplifier,
DAT or MD by using an optional digital cable. The digital stereo audio signal from a disc is directly transferred. If
you connect the unit to a Dolby Digital or DTS decoder or an amplifier with built-in the decoder by using an optional
digital cable, you can enjoy high-quality surround sound.
When you make the digital connection, also make the analog connection, because, depending on the disc type, no
audio may be reproduced from the DIGITAL OUT.
The unit
VIDEO OUT
VIDEO S-VIDEO
Y
P
P
B
R
COMPONENT
LEFT
PCM/STREAM
OPTICAL
RIGHT
AUDIO OUT
DIGITAL OUT
Red
White
Audio cable
(not supplied)
• For digital connection, connect the unit's DIGITAL OUT (optical) to the digital input of an audio equipment using an
optional digital cable.
NOTES
• When you connect the unit's DIGITAL OUT to digital audio equipment, before using, make the "DIGITAL AUDIO OUTPUT"
setting in the "PREFERENCE 2" on-screen display correctly according to the connected audio equipment. If the "DIGITAL
AUDIO OUTPUT" is not set correctly, loud noise may be generated from speakers, causing damage of your speakers. See
"DIGITAL AUDIO OUTPUT" on page 35.
• With the digital connection, the unit's settings for COMPRESSION and DOWN MIX are invalid. Settings for these items must be
made from the decoder.
To connect the power cord
When all the connections have been made, insert the power plug into the wall outlet firmly. The STANDBY indicator
lights and setup is completed.
Warning
• Disconnect the power cord if you are not going to use the unit for a long time.
• Disconnect the power cord before cleaning the unit.
• Disconnect the power cord before moving the unit.
• Do not connect or disconnect the power cord with wet hands.
• Do not pull the power cord when disconnecting it, as this may damage the cord and cause fire, electric shock, or
other accidents.
Caution
• Do not damage, alter, twist, or pull the power cord, as this may cause fire, electric shock, or other accidents.
• Contact a dealer and get a new power cord if the cord is damaged. A damaged cord may cause fire, electric shock,
or other accidents.
• Do not put anything heavy, or the unit, on the power cord, as this may cause fire, electric shock, or other accidents.
All manuals and user guides at all-guides.com
AV COMPU LINK
Optical digital cable
(not supplied)
Digital equipment
IN
Red
RIGHT
AUDIO
LEFT
White
Getting started
English
Français
IN
DIGITAL
OPTICAL
14
Publicité
