Publicité
Les langues disponibles
Les langues disponibles
Phillips
Screwdriver
Faucet Body
1. Faucet Installation
Clean the lavatory surface to remove any grease, oil, or debris.
Insert the faucet supply hoses into the hole in the lavatory.
Insert the lift rod into the hole at the rear of the faucet body.
Using a #2 Phillips screwdriver or 3/16" hex wrench, tighten the
faucet through the lift rod hole.
Kohler Co.
All manuals and user guides at all-guides.com
Hex
Wrench
3
1012738-2-E
Publicité
