Beko BFFD3626SS Manuel D'utilisation page 10

Installation
-Upper hinge group is fixed with 3 screws.
-The hinge cover is attached after the sockets are
installed.
- Then the hinge cover is fixed with two screws.
3.4 Electric connection
A
WARNING:
Do not make connections via
extension cables or multi-plugs.
B
WARNING:
Damaged power cable must
be replaced by the Authorized Service
Agent.
C
If two coolers are to be installed side
by side, there should be at least 4 cm
distance between them.
• Our company shall not be liable for any
damages that will arise when the product
is used without grounding and electrical
connection in accordance with the national
regulations.
• Power cable plug must be within easy reach
after installation.
• Do not extension cords or cordless multiple
outlets between your product and the wall
outlet.
All manuals and user guides at all-guides.com
3.5 Water connection
Depending on the model of the refrigerator, you
can connect it either to a demijohn or water mains.
First you must connect the water hose to the
refrigerator.
C
A
C
Check that following part have been delivered
together with the product:
3.5.1 Before Installation
Make sure that you have everything necessary
to ensure proper installation before proceeding,
including:
Your product comes with an internal water filter for
9/ 25 EN
In cases where a demijohn is used, a
separate pump must also be used.
WARNING:
Refrigerator and the pump, if
any, must be unplugged during connection.
Following parts may not be supplied with
your product since they are not required
when using a demijohn.
External water filter. (If there is a demijohn
connection; it is not necessary to use a water
filter.)
use inside the fridge. Part number of the filter is
4918450200 and you can use this part number
when ordering replacement filters.
Refrigerator / User Manual