Salton SST406 Manuel D'instructions page 7

Allow toaster to cool down and unplug.
CLEANING AND MAINTENANCE

Always remember to unplug the toaster from the electrical outlet when not in use
and before cleaning. Let it cool before cleaning and storing away.

The body of the toaster and the crumb tray should be cleaned with a damp cloth.
Do not let water enter the toaster.

Don't let anything enter the slots, you might damage the elements.

Do not use bleach or other abrasive substance or solvents to clean your toaster as
it can be damaging to the finish.

To remove stubborn spots/marks, wipe the surfaces with a cloth slightly dampened
in soapy water or mild non-abrasive cleaner. Rinse and dry with a clean, dry, soft
cloth.
STORING THE APPLIANCE

Unplug the unit from the wall outlet and clean all the parts as instructed above.
Ensure that all parts are dry before storing.

Store the appliance in its box or in a clean, dry place.

Never store the appliance while it is still dirty.

Never wrap the power cord around the appliance.
SERVICING THE APPLIANCE
There are no user serviceable parts in this appliance. If the unit is not operating
correctly, please check the following:

You have followed the instructions correctly

That the unit has been wired correctly and that the wall socket is switched on.

That the mains power supply is ON.

That the plug is firmly in the mains socket.
If the appliance still does not work after checking the above:
- Consult the retailer for possible repair or replacement. If the retailer fails to resolve the
problem and you need to return the appliance, make sure that:

The unit is packed carefully back into its original packaging.
All manuals and user guides at all-guides.com
7