Publicité
7 7
Take (2) two supplied hex head screws and install
through the holes in the MudFlap using a ratchet and
appropriate socket and tighten to a snug fit.
9
9
Install the passenger side MudFlap marked "RH,"
repeating Steps 3-8.
WARNING:
The MudFlap is designed to fit vehicles with standard-sized wheels and tires. Installation of MudFlaps on vehicles with aftermarket
wheels or oversized tires may interfere with the MudFlap, will void the warranty and may damage the MudFlap or the vehicle.
(630) 769-1500
weathertech.com/warranty
8
8
While firmly pressing the MudFlap up to the fender,
fully tighten the (2) two supplied hex head screws.
10
10
Congratulations!
Your new WeatherTech® No-Drill
MudFlaps have been installed! Your WeatherTech®
No-Drill MudFlap carries a Lifetime Limited Warranty
against defects in materials and workmanship when
installed correctly.
Publicité
