Télécharger Imprimer la page

Hama 00062713 Mode D'emploi page 12

Masquer les pouces Voir aussi pour 00062713:

Publicité

Les langues disponibles

Les langues disponibles

All manuals and user guides at all-guides.com
g Operating Instruction
Contents
1.
USB Multifunction Server wiring
2.
Control Center installation
3.
Network confi guration
4.
Control Center
4.1 Basic confi guration
4.1.1 General confi guration
4.1.2 TCP/IP
4.1.3 Supported protocols
4.1.4 User accounts
4.1.5 Maintenance
4.1.6 E-mail
4.1.7 SNMP
5.
Printer server (printer connection)
5.1 Direct connection
5.2 Network printers
6.
Network scanners
7.
Addition of USB storage media
to the network
7.1 Direct connection
7.2 Network access
7.2.1 Quick access
7.2.2 Installation of the SMB share on a PC
7.2.3 FTP access
8.
Support und contact
Package contents:
1 x Hama USB Multifunction Server
1 x 12 V power supply unit
1 x Printed operating instructions
Safety notes:
Do not use the device in moist or extremely dusty areas,
on radiators or near heat sources. This device is not
designed for use outdoors. Protect the device from
pressure and impact. The device may not be opened or
moved during operation.
Caution: Use the device with the enclosed power supply
unit only. The use of other power supply units can cause
damage to the device.
Introduction:
The USB Multifunction Server allows you to make USB
devices such as printers, scanners or hard disks
accessible on a network. In other words, every user on
the network can access this device.
It is also possible to connect a USB hub to the USB port,
however, keep in mind that only one device of each type
12
(printer/hard disk) can be managed. You should not
12
connect more than a total of two devices to the server.
12
Abbreviations in the text:
13
Hama USB Multifunction Server = MFS
14
Hama USB Multifunction Server Control Center = Control
14
Center
14
1. Connection
14
15
15
16
16
16
16
16
17
17
Power supply connection
17
18
18
18
18
19
Connection to USB device
e.g. printer/scanner/HDD
Computer
Computer
Switch
Router
Acess
point
MFS
Notebook
Reset to default
settings (see 4.1.5)
Connection to
network
e.g. router/switch/
hub
MFPrinter
Printer
Scanner
USB Hub
USB Storage
USB-
Storage
11

Publicité

loading